localhost /home/michi # os-prober
  WARNING: Failed to connect to lvmetad. Falling back to device scanning.
  /dev/sdb: open failed: No medium found
localhost /home/michi # 

localhost /home/michi # mount
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
none on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=10240k,nr_inodes=2036784,mode=755)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
/dev/sda4 on / type ext4 (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
configfs on /sys/kernel/config type configfs (rw,nosuid,nodev,noexec,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup_root on /sys/fs/cgroup type tmpfs (rw,nosuid,nodev,noexec,relatime,size=10240k,mode=755)
openrc on /sys/fs/cgroup/openrc type cgroup (rw,nosuid,nodev,noexec,relatime,release_agent=/lib/rc/sh/cgroup-release-agent.sh,name=openrc)
none on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cpuset on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cpuacct on /sys/fs/cgroup/cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpuacct)
mqueue on /dev/mqueue type mqueue (rw,nosuid,nodev,noexec,relatime)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,nosuid,nodev,noexec,relatime)
localhost /home/michi # 

# /etc/fstab: static file system information.
#
# noatime turns off atimes for increased performance (atimes normally aren't 
# needed); notail increases performance of ReiserFS (at the expense of storage 
# efficiency).  It's safe to drop the noatime options if you want and to 
# switch between notail / tail freely.
#
# The root filesystem should have a pass number of either 0 or 1.
# All other filesystems should have a pass number of 0 or greater than 1.
#
# See the manpage fstab(5) for more information.
#

# <fs>                  <mountpoint>    <type>          <opts>          <dump/pass>

# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
#
# NOTE: Even though we list ext4 as the type here, it will work with ext2/ext3
#       filesystems.  This just tells the kernel to use the ext4 driver.
#
# NOTE: You can use full paths to devices like /dev/sda3, but it is often
#       more reliable to use filesystem labels or UUIDs. See your filesystem
#       documentation for details on setting a label. To obtain the UUID, use
#       the blkid(8) command.

#LABEL=boot             /boot           ext4            noauto,noatime  1 2
#UUID=58e72203-57d1-4497-81ad-97655bd56494              /               ext4            noatime         0 1
#LABEL=swap             none            swap            sw              0 0
#/dev/cdrom             /mnt/cdrom      auto            noauto,ro       0 0
/dev/sda3               /
/dev/sda5               /boot           vfat
/etc/fstab lines 1-31/31 (END)